FOUNDRY-MASTER Smart台式直读光谱仪技术参数
FOUNDRY-MASTER Smart台式光谱仪可应用于固体金属样品的元素定量分析及牌号鉴定。光学系统采用CCD检测器,光谱范围覆盖黑色、有色金属典型材料,全新数字光源,仪器装备有氩气冲洗火花台,开放式火花台适合不同形状和尺寸的样品分析。
Spectrometer Optical System光谱仪光学系统
- Flat field Multi-CCD optics平场多CCD光学系统
- Focal length : 300 mm. 焦距:300 mm
- Effective wavelength 175 – 671nm. 有效波长范围:175 – 671nm
- Pixel resolution 14 pm. 像素分辨率:14 pm
- Reciprocal dispersion(1st order). 线色散率倒数(一级):1.75nm/mm
- External entrance window, easy access for cleaning or exchange外部入射窗口,方便清洗及更换
- High stability against outside influences thanks to Peak Position Alignment (PPA).
实时波长校准功能保证了优异的长期稳定性。
- Solid, robust technology and compact design allow continuous use in any location, in the lab or on site, even in rugged conditions.
保证仪器能够在任何恶劣的环境中持续正常工作,从实验室到炉前现场,甚至更严酷的环境。
Spark Source火花源
- New digital spark generator with optimized discharge parameters for atomic lines, lowering detection limits of a wide range of elements全新的数字光源,电脑调节最优的火花激发参数,帮助降低元素检出限
- High energy pre-spark (HEPS) 高能预燃技术 (HEPS)
- Computer controlled parameters计算机调节参数
- Frequency 80– 500 Hz频率80 – 500 Hz
- Voltage 250 – 500 V电压250– 500 V
Argon Flushed Spark Stand氩气冲洗火花台
- Three-sided open sample stand开放式样品台设计
- Jet-Stream-Electrode with low argon consumption低氩气消耗的“喷射电极”技术
- Universal adjustable sample clamp通用可调样品适配器
- Exchangeable sparkstand plate for individual matrices特殊样品可更换相应火花台
- Air cooled空气冷却系统
Computer and readout system (external PC) 计算机及读出系统(笔记本电脑)
- Intel(R) i5-5200U 英特尔i5处理器
- Windows 10 operating systems Windows 10操作系统旗舰版
- Min. 2.20 GHz and 4 GB Ram 主频2.20GHz内存4.00GB
- AMD Radeon R5 M330 显卡
- Hard disk 硬盘容量500GB
- CD-burner CD烧录功能
- Multi-channel A/D converter多通道A/D转换
- Fire-Wire, LAN Ethernet防火墙,局域网
- Parallel interface并口
- Serial (RS 232) Interface系列RS232接口
- 2 USB Interfaces, 2个USB接口,
- VGA Video port视频输出功能
- Battery life 5 hours电池续航时间 5个小时
- External, 14.1 “TFT-LCD–Display 14.1 “液晶显示器
- Resolution 1280 * 800 分辨率1280 * 800
- Weight 1.94Kg 重量 1.94千克
Data Output数据输出
- Matrix-, Inkjet-, Thermo- or Laser-printer, all standard printers can be used可接驳各种标准打印设备
- Storage on disc (or other medium) and transfer to other programs (Excel, PDF) 数据存储在移动存储器上或以Excel、PDF形式输出
- Network connection via serial or USB-Interface网络连接通过串口或USB接口
Software软件
- Operating system Windows 8 Windows 8操作系统,
- spectrometer software WAS光谱仪WasLab操作软件
- Optional data maintenance programs 可选数据维护程序
Analytical Functions of Spectrometer Software操作软件分析功能
- Type recalibration控样校正
- Global or partial recalibration全局或局部标准化
- Reproducibility check during recalibration and analysis校准和分析时再现性检查
- Automatic display of required recalibration- or control samples校准或监控样品的自动显示
- Flagging of results beyond calibration range自动标识超出曲线范围的结果
- Input of user-defined sample identity codes用户自定义样品码输入
- Automatic or user-controlled printout of analytical results自动或用户自定义分析结果的打印、存储及输出
- Free editable grade database自定义牌号数据库
- Grade-search and identification牌号搜索和牌号鉴定功能
- Input of user-defined formulas自定义公式输入
- Output of analytical results in light quantity intensities, ratios, recalibrated intensity ratios, corrected recalibrated intensity ratios 分析结果可显示绝对强度、相对强度、标准化强度和校正强度等多种形式
- Output of analytical results in concentration, mass percentage, mass percentage related to spectral lines 分析结果可用浓度、通道浓度表示
- 1 or 2 point recalibration单点标或两点标准化
- Additive and multiplicative interelement correction干扰校正
- Matrix correction基体校正
- Automatic spectral line switching 谱线自动切换
- Calculation of average, standard deviation and variation coefficient for any number of burns任意激发次数测量结果的平均值、标准偏差及相对标准偏差等计算
- Automatic hardware diagnostics硬件故障自动诊断
- Graphical display of spectra 光谱图形显示
- Storage of spectral information for future evaluation谱图信息存储
TECHNICAL DATA 技术数据
Dimensions 尺寸:
- 高: 280 mm
- 长: 665 mm
- 宽: 415 mm
- 重量:35 kg
电源要求:
- 220 V /50 Hz
- 运行功率700 W
- 待机功率50 W
- 16 A慢熔保险丝
氩气要求:
- 99.999%高纯氩气, purity 5.0
- 进气压力3bar,Pressure 3 bar
- 铜管Copper argon duct , unpolluted (e.g. solder)
仪器分析范围
FOUNDRY-MASTER Smart直读光谱仪铁基体分析范围
元素 |
Fe 100 |
Fe 150 |
Fe 200 |
Fe 250 |
Fe 300 |
Fe 305 |
Fe 400 |
Fe 500 |
Fe 000 |
low alloy steel |
free cutting steel |
cast iron |
Cr-Hard/Ni.Resist |
stainless steel |
stainless steel + N |
tool steel |
high Mn steel |
Fe-Orientation |
Min |
Max |
Min |
Max |
Min |
Max |
Min |
Max |
Min |
Max |
Min |
Max |
Min |
Max |
Min |
Max |
Min |
Max |
C |
0.003 |
1.8 |
0.003 |
1.8 |
1.7 |
5 |
1 |
4.5 |
0.005 |
2.6 |
0.005 |
2.6 |
0.003 |
2.6 |
0.003 |
1.8 |
0.005 |
4 |
Si |
0.003 |
2.4 |
0.003 |
2.3 |
0.003 |
6 |
0.005 |
7 |
0.005 |
4.5 |
0.005 |
4.5 |
0.002 |
1.5 |
0.002 |
2 |
0.005 |
7 |
Mn |
0.002 |
2.5 |
0.005 |
2.5 |
0.003 |
1.6 |
0.003 |
2.4 |
0.002 |
18 |
0.002 |
18 |
0.002 |
2.5 |
7 |
22 |
0.005 |
25 |
P |
0.002 |
0.2 |
0.003 |
0.15 |
0.003 |
0.8 |
0.003 |
0.55 |
0.002 |
0.17 |
0.002 |
0.17 |
0.002 |
0.15 |
0.002 |
0.15 |
0.005 |
0.8 |
S |
0.002 |
0.1 |
0.002 |
0.45 |
0.002 |
0.22 |
0.003 |
0.25 |
0.003 |
0.42 |
0.003 |
0.42 |
0.002 |
0.15 |
0.002 |
0.15 |
0.005 |
0.45 |
Cr |
0.003 |
5.5 |
0.003 |
5.5 |
0.003 |
2.5 |
0.005 |
40 |
0.002 |
35 |
0.002 |
35 |
0.002 |
22 |
0.003 |
5 |
0.005 |
40 |
Mo |
0.005 |
1.8 |
0.005 |
1.5 |
0.003 |
2 |
0.005 |
4 |
0.003 |
8 |
0.003 |
8 |
0.003 |
11 |
0.005 |
2.2 |
0.005 |
11 |
Ni |
0.003 |
5.5 |
0.005 |
5.5 |
0.005 |
3.5 |
0.005 |
31 |
0.005 |
55 |
0.005 |
55 |
0.003 |
5 |
0.005 |
4.5 |
0.005 |
55 |
Al |
0.002 |
1.7 |
0.002 |
1.7 |
0.002 |
1.4 |
0.002 |
0.15 |
0.002 |
6 |
0.002 |
6 |
0.005 |
0.5 |
0.005 |
0.5 |
0.005 |
6 |
Co |
0.002 |
1 |
0.003 |
0.9 |
0.002 |
0.5 |
0.004 |
0.3 |
0.002 |
13 |
0.002 |
13 |
0.002 |
13 |
0.002 |
0.4 |
0.005 |
13 |
Cu |
0.003 |
1 |
0.001 |
0.8 |
0.003 |
3.5 |
0.002 |
10 |
0.002 |
8.5 |
0.002 |
8.5 |
0.001 |
1 |
0.002 |
1 |
0.005 |
10 |
Nb |
0.001 |
1.7 |
0.003 |
1 |
0.002 |
0.2 |
0.003 |
0.5 |
0.003 |
3.5 |
0.003 |
3.5 |
0.001 |
1.7 |
0.001 |
1 |
0.005 |
3 |
Ti |
0.001 |
1 |
0.002 |
0.5 |
0.001 |
0.35 |
0.005 |
0.35 |
0.001 |
2.3 |
0.001 |
2.3 |
0.001 |
1 |
0.001 |
1.2 |
0.005 |
2 |
V |
0.001 |
1 |
0.002 |
1 |
0.002 |
0.8 |
0.005 |
1 |
0.001 |
1 |
0.001 |
1 |
0.002 |
11 |
0.001 |
0.5 |
0.005 |
10 |
W |
0.005 |
2 |
0.025 |
2 |
- |
- |
0.01 |
0.4 |
0.01 |
4 |
0.01 |
4 |
0.01 |
22 |
- |
- |
0.025 |
25 |
Zr |
0.002 |
0.5 |
0.005 |
0.5 |
0.003 |
0.06 |
- |
- |
0.002 |
0.4 |
0.002 |
0.4 |
- |
- |
- |
- |
- |
- |
As |
0.002 |
0.1 |
0.005 |
0.1 |
0.002 |
0.15 |
- |
- |
- |
- |
- |
- |
0.002 |
0.1 |
- |
- |
- |
- |
Sn |
0.002 |
0.3 |
0.002 |
0.3 |
0.003 |
0.25 |
0.003 |
0.25 |
- |
- |
- |
- |
0.002 |
0.35 |
0.002 |
0.15 |
- |
- |
B |
0.0005 |
0.015 |
0.0005 |
0.015 |
0.001 |
0.11 |
- |
- |
0.001 |
0.015 |
0.001 |
0.015 |
- |
- |
- |
- |
- |
- |
Ca |
0.0005 |
0.01 |
0.0005 |
0.01 |
- |
- |
- |
- |
- |
- |
- |
- |
- |
- |
- |
- |
- |
- |
Pb |
0.001 |
0.05 |
0.01 |
0.35 |
0.003 |
0.3 |
- |
- |
0.003 |
0.3 |
0.003 |
0.3 |
- |
- |
- |
- |
0.005 |
0.3 |
Mg |
- |
- |
- |
- |
0.0005 |
0.125 |
- |
- |
- |
- |
- |
- |
- |
- |
- |
- |
- |
- |
Bi |
0.001 |
0.15 |
0.01 |
0.15 |
0.002 |
0.025 |
- |
- |
- |
- |
- |
- |
- |
- |
- |
- |
- |
- |
Zn |
0.002 |
0.025 |
0.001 |
0.025 |
0.002 |
0.04 |
- |
- |
- |
- |
- |
- |
- |
- |
- |
- |
- |
- |
Sb |
0.005 |
0.24 |
- |
- |
0.005 |
0.28 |
- |
- |
0.005 |
0.24 |
0.005 |
0.24 |
- |
- |
- |
- |
- |
- |
Se |
0.001 |
0.05 |
- |
- |
0.004 |
0.07 |
- |
- |
0.01 |
0.4 |
0.01 |
0.4 |
- |
- |
- |
- |
- |
- |
Ce |
- |
- |
- |
- |
0.002 |
0.08 |
- |
- |
- |
- |
- |
- |
- |
- |
- |
- |
- |
- |
La |
- |
- |
- |
- |
0.001 |
0.05 |
- |
- |
- |
- |
- |
- |
- |
- |
- |
- |
- |
- |
Fe |
internal Standard |
internal Standard |
internal Standard |
internal Standard |
internal Standard |
internal Standard |
internal Standard |
internal Standard |
internal Standard |
用户提供标样,日立分析仪器可现场延长测量上限。
FOUNDRY-MASTER Smart直读光谱仪铝基体分析范围
元素 |
Al 100 |
Al 200 |
Al 300 |
Al 400 |
Al 450 |
Al 500 |
Al 000 |
low alloy Al |
Al-Cu alloy |
Al-Mg alloy |
Al-Si alloy |
Al-Si-Cu alloy |
Al-Zn alloy |
Al-Orientation |
Min |
Max |
Min |
Max |
Min |
Max |
Min |
Max |
Min |
Max |
Min |
Max |
Min |
Max |
|
Ag |
0.001 |
1.2 |
0.001 |
1.2 |
0.001 |
1.2 |
0.001 |
1.2 |
0.001 |
1.2 |
0.001 |
1.2 |
0.001 |
1.2 |
|
B |
0.0005 |
0.025 |
0.0005 |
0.025 |
0.0005 |
0.025 |
0.0005 |
0.025 |
0.0005 |
0.025 |
0.0005 |
0.025 |
0.0005 |
0.025 |
|
Be |
0.0001 |
0.02 |
0.0001 |
0.02 |
0.0001 |
0.02 |
0.0001 |
0.02 |
0.0001 |
0.02 |
0.0001 |
0.02 |
0.0001 |
0.02 |
|
Bi |
0.01 |
0.7 |
0.01 |
0.7 |
0.01 |
0.7 |
0.01 |
0.7 |
0.01 |
0.7 |
0.01 |
0.7 |
0.01 |
0.7 |
|
Ca |
0.0001 |
0.02 |
0.0001 |
0.02 |
0.0001 |
0.02 |
0.0001 |
0.02 |
0.0001 |
0.02 |
0.0001 |
0.02 |
0.0001 |
0.02 |
|
Cd |
0.001 |
0.4 |
0.001 |
0.4 |
0.001 |
0.4 |
0.001 |
0.4 |
0.001 |
0.4 |
0.001 |
0.4 |
0.001 |
0.4 |
|
Co |
0.003 |
0.5 |
0.003 |
0.5 |
0.003 |
0.5 |
0.003 |
0.5 |
0.003 |
0.5 |
0.003 |
0.5 |
0.003 |
0.5 |
|
Cr |
0.001 |
0.7 |
0.001 |
0.7 |
0.001 |
0.7 |
0.001 |
0.7 |
0.001 |
0.7 |
0.001 |
0.7 |
0.001 |
0.7 |
|
Cu |
0.001 |
0.7 |
0.001 |
11 |
0.001 |
5 |
0.001 |
4 |
0.001 |
11 |
0.001 |
4 |
0.001 |
11 |
|
Fe |
0.001 |
2.2 |
0.001 |
2.2 |
0.001 |
3 |
0.001 |
3 |
0.001 |
2.2 |
0.001 |
2.2 |
0.001 |
3 |
|
Ga |
0.001 |
0.15 |
0.001 |
0.15 |
0.001 |
0.15 |
0.001 |
0.15 |
0.001 |
0.15 |
0.001 |
0.15 |
0.001 |
0.15 |
|
Hg |
0.005 |
0.08 |
0.005 |
0.08 |
0.005 |
0.08 |
0.005 |
0.08 |
0.005 |
0.08 |
0.005 |
0.08 |
0.005 |
0.08 |
|
In |
0.005 |
0.2 |
0.005 |
0.2 |
0.005 |
0.2 |
0.005 |
0.2 |
0.005 |
0.2 |
0.005 |
0.2 |
0.005 |
0.2 |
|
La |
0.001 |
0.04 |
0.001 |
0.04 |
0.001 |
0.04 |
0.001 |
0.04 |
0.001 |
0.04 |
0.001 |
0.04 |
0.001 |
0.04 |
|
Li |
0.0001 |
0.035 |
0.0001 |
0.035 |
0.0001 |
0.035 |
0.0001 |
0.035 |
0.0001 |
0.035 |
0.0001 |
0.035 |
0.0001 |
0.035 |
|
Mg |
0.001 |
1.5 |
0.001 |
1.5 |
0.001 |
13 |
0.001 |
3 |
0.001 |
3 |
0.001 |
4 |
0.001 |
13 |
|
Mn |
0.002 |
2.2 |
0.002 |
2.2 |
0.002 |
2.2 |
0.002 |
2.2 |
0.002 |
2.2 |
0.002 |
2.2 |
0.002 |
2.2 |
|
Mo |
0.001 |
1 |
0.001 |
1 |
0.001 |
1 |
0.001 |
1 |
0.001 |
1 |
0.001 |
1 |
0.001 |
1 |
|
Na |
0.0005 |
0.035 |
0.0005 |
0.035 |
0.0005 |
0.035 |
0.0005 |
0.035 |
0.0005 |
0.035 |
0.0005 |
0.035 |
0.0005 |
0.035 |
|
Ni |
0.003 |
2 |
0.003 |
3.5 |
0.003 |
3.5 |
0.003 |
3.5 |
0.003 |
3.5 |
0.003 |
3.5 |
0.003 |
6 |
|
Pb |
0.005 |
1.8 |
0.005 |
1.8 |
0.005 |
1.8 |
0.005 |
1.8 |
0.005 |
1.8 |
0.005 |
1.8 |
0.005 |
1.8 |
|
Sb |
0.05 |
0.7 |
0.05 |
0.7 |
0.05 |
0.7 |
0.05 |
0.7 |
0.05 |
0.7 |
0.05 |
0.7 |
0.05 |
0.7 |
|
Si |
0.002 |
1.5 |
0.002 |
1.5 |
0.002 |
1.5 |
0.002 |
28 |
0.002 |
28 |
0.002 |
1.5 |
0.002 |
28 |
|
Sn |
0.005 |
0.3 |
0.005 |
0.5 |
0.005 |
4.5 |
0.005 |
0.5 |
0.005 |
4.5 |
0.005 |
4.5 |
0.005 |
4.5 |
|
Sr |
0.0001 |
0.16 |
0.0001 |
0.16 |
0.0001 |
0.16 |
0.0001 |
0.16 |
0.0001 |
0.16 |
0.0001 |
0.16 |
0.0001 |
0.16 |
|
Ti |
0.001 |
0.3 |
0.001 |
0.7 |
0.001 |
0.7 |
0.001 |
0.3 |
0.001 |
0.7 |
0.001 |
0.7 |
0.001 |
0.7 |
|
V |
0.001 |
0.15 |
0.001 |
0.15 |
0.001 |
0.15 |
0.001 |
0.15 |
0.001 |
0.15 |
0.001 |
0.15 |
0.001 |
0.15 |
|
Zn |
0.002 |
2 |
0.002 |
2 |
0.002 |
5 |
0.002 |
2 |
0.002 |
2 |
0.002 |
13.5 |
0.002 |
13.5 |
|
Zr |
0.005 |
0.25 |
0.005 |
0.25 |
0.005 |
0.25 |
0.005 |
0.25 |
0.005 |
0.25 |
0.005 |
0.25 |
0.005 |
1 |
|
Al |
Internal standard |
Internal standard |
Internal standard |
Internal standard |
Internal standard |
Internal standard |
Internal standard |
|
用户提供标样,日立分析仪器可现场延长测量上限。
FOUNDRY-MASTER Smart直读光谱仪铜基体分析范围
元素 |
Cu 050 |
Cu 100 |
Cu 200 |
Cu 300 |
Cu 350 |
Cu 400 |
Cu 450 |
Cu 500 |
Cu 000 |
low alloy Cu |
Cu-Be/Co/Ag |
Cu-Zn Brass |
Cu-Sn-Pb Bronze |
Cu-Sn-Zn-Pb alloys
Gunmetal |
Cu-Ni alloys
white copper |
Cu-Zn-Ni alloys |
Cu-Al alloys |
Cu-Orientation |
Min |
Max |
Min |
Max |
Min |
Max |
Min |
Max |
Min |
Max |
Min |
Max |
Min |
Max |
Min |
Max |
Min |
Max |
Ag |
0.002 |
0.3 |
0.002 |
1.7 |
0.002 |
1 |
0.002 |
0.5 |
0.002 |
0.1 |
- |
- |
- |
- |
- |
- |
0.002 |
1.2 |
Al |
0.001 |
1 |
0.001 |
0.12 |
0.002 |
3 |
0.001 |
0.7 |
0.001 |
0.5 |
0.001 |
0.7 |
- |
- |
0.001 |
13 |
0.001 |
13 |
As |
0.001 |
0.5 |
- |
- |
0.001 |
0.5 |
0.001 |
0.5 |
0.001 |
0.25 |
- |
- |
- |
- |
0.001 |
0.5 |
0.001 |
0.5 |
B |
0.002 |
0.1 |
0.002 |
0.1 |
- |
- |
- |
- |
- |
- |
- |
- |
- |
- |
- |
- |
0.002 |
0.1 |
Be |
0.0002 |
0.6 |
0.0002 |
2.6 |
- |
- |
0.0002 |
0.25 |
0.0002 |
0.25 |
- |
- |
- |
- |
- |
- |
0.0002 |
2.5 |
Bi |
0.003 |
0.5 |
- |
- |
0.005 |
6 |
0.003 |
0.5 |
0.003 |
7 |
0.003 |
0.2 |
- |
- |
- |
- |
0.003 |
7 |
Cd |
0.002 |
1 |
- |
- |
0.0005 |
0.1 |
0.003 |
0.1 |
0.003 |
0.1 |
- |
- |
- |
- |
- |
- |
0.003 |
1.3 |
Co |
0.005 |
1 |
0.005 |
3.6 |
0.005 |
1.5 |
0.005 |
0.7 |
0.005 |
0.7 |
0.005 |
0.7 |
- |
- |
0.005 |
0.3 |
0.005 |
3.6 |
Cr |
0.001 |
1 |
0.001 |
0.1 |
0.001 |
0.5 |
0.001 |
0.7 |
0.001 |
0.1 |
0.001 |
3.5 |
- |
- |
0.001 |
0.5 |
0.001 |
3.5 |
Fe |
0.005 |
1 |
0.005 |
0.2 |
0.005 |
7 |
0.005 |
1.5 |
0.005 |
0.75 |
0.005 |
3 |
0.005 |
1.5 |
0.005 |
7 |
0.005 |
7.5 |
Mg |
0.0005 |
0.25 |
- |
- |
0.0005 |
0.2 |
0.0005 |
0.25 |
- |
- |
0.0005 |
0.25 |
- |
- |
0.0005 |
0.25 |
0.0005 |
0.25 |
Mn |
0.002 |
1 |
0.002 |
0.07 |
0.002 |
5 |
0.002 |
0.5 |
0.002 |
0.5 |
0.002 |
1.5 |
0.002 |
1 |
0.002 |
2 |
0.002 |
15 |
Nb |
0.002 |
1 |
- |
- |
- |
- |
0.002 |
1 |
- |
- |
0.002 |
1 |
0.002 |
1 |
- |
- |
0.002 |
1 |
Ni |
0.002 |
1 |
0.002 |
0.12 |
0.005 |
5 |
0.002 |
3 |
0.002 |
3 |
0.002 |
42 |
0.002 |
20 |
0.002 |
7 |
0.002 |
42 |
P |
0.002 |
0.7 |
- |
- |
0.003 |
0.8 |
0.002 |
1 |
0.002 |
0.3 |
0.002 |
1 |
0.002 |
0.1 |
0.002 |
1 |
0.002 |
1 |
Pb |
0.002 |
1 |
0.002 |
0.25 |
0.005 |
5 |
0.002 |
25 |
0.002 |
10 |
0.002 |
1 |
0.002 |
0.5 |
0.002 |
1 |
0.002 |
25 |
S |
0.001 |
0.2 |
- |
- |
0.002 |
0.15 |
0.001 |
0.2 |
- |
- |
0.001 |
0.2 |
- |
- |
- |
- |
0.001 |
0.2 |
Sb |
0.005 |
0.75 |
- |
- |
0.005 |
0.6 |
0.005 |
0.75 |
0.005 |
0.75 |
0.005 |
0.75 |
- |
- |
0.005 |
0.75 |
0.005 |
0.75 |
Se |
0.001 |
1 |
- |
- |
- |
- |
- |
- |
- |
- |
- |
- |
- |
- |
- |
- |
0.001 |
1 |
Si |
0.003 |
1 |
0.003 |
0.2 |
0.005 |
7.5 |
0.003 |
0.5 |
0.003 |
0.1 |
0.003 |
1 |
0.003 |
1 |
0.003 |
0.5 |
0.003 |
8.5 |
Sn |
0.002 |
1 |
0.002 |
0.1 |
0.005 |
5 |
0.002 |
20 |
0.002 |
11 |
0.002 |
0.5 |
0.002 |
0.2 |
0.002 |
0.5 |
0.002 |
20 |
Te |
0.005 |
1 |
- |
- |
- |
- |
- |
- |
- |
- |
- |
- |
- |
- |
- |
- |
0.005 |
1 |
Ti |
0.001 |
0.07 |
- |
- |
- |
- |
- |
- |
- |
- |
0.001 |
0.07 |
0.001 |
0.07 |
- |
- |
0.001 |
0.07 |
Zn |
0.005 |
1 |
0.005 |
0.15 |
0.005 |
45 |
0.005 |
10 |
0.005 |
15 |
0.005 |
0.5 |
0.005 |
30 |
0.005 |
1 |
0.005 |
50 |
Zr |
0.002 |
0.06 |
- |
- |
0.002 |
0.06 |
0.002 |
0.06 |
- |
- |
0.002 |
0.06 |
0.002 |
0.06 |
- |
- |
0.002 |
0.06 |
Cu |
Internal Standard |
Internal Standard |
Internal Standard |
Internal Standard |
Internal Standard |
Internal Standard |
Internal Standard |
Internal Standard |
Internal Standard |
用户提供标样,日立分析仪器可现场延长测量上限。
FOUNDRY-MASTER Smart直读光谱仪镍基体分析范围
元素 |
Ni 100 |
Ni 200 |
Ni 300 |
Ni 400 |
Ni 500 |
Ni 600 |
Ni 700 |
Ni 000 |
low alloy |
Monel |
Nimonic |
Incoloy |
Inconel |
Hastelloy |
Marmalloy |
Orientation |
Min |
Max |
Min |
Max |
Min |
Max |
Min |
Max |
Min |
Max |
Min |
Max |
Min |
Max |
Min |
Max |
Al |
0.005 |
2 |
0.005 |
4.5 |
0.005 |
2 |
0.005 |
0.5 |
0.005 |
3 |
0.005 |
0.5 |
2 |
7 |
0.005 |
8.5 |
B |
0.001 |
0.05 |
- |
- |
0.001 |
0.05 |
0.001 |
0.05 |
0.001 |
0.05 |
0.001 |
0.05 |
0.001 |
0.05 |
0.001 |
3.6 |
C |
0.002 |
0.5 |
0.002 |
0.5 |
0.0005 |
0.5 |
0.002 |
0.5 |
0.002 |
0.5 |
0.002 |
0.5 |
0.002 |
0.5 |
0.002 |
0.5 |
Co |
0.002 |
2 |
0.002 |
2 |
0.002 |
25 |
0.002 |
22 |
0.002 |
21 |
0.002 |
3 |
0.002 |
21 |
0.002 |
25 |
Cr |
0.002 |
1 |
0.002 |
3 |
12 |
33 |
10 |
25 |
10 |
33 |
0.002 |
25 |
2 |
25 |
0.002 |
35 |
Cu |
0.002 |
2 |
22 |
35 |
0.002 |
1 |
0.002 |
4 |
0.002 |
35 |
0.002 |
1.5 |
0.002 |
2 |
0.002 |
35 |
Fe |
0.005 |
2 |
0.005 |
5 |
0.005 |
20 |
10 |
45 |
0.005 |
50 |
0.005 |
25 |
0.005 |
3 |
0.005 |
50 |
Hf |
- |
- |
- |
- |
- |
- |
- |
- |
- |
- |
- |
- |
0.005 |
2 |
0.005 |
2 |
Mg |
0.0005 |
0.15 |
0.0005 |
0.15 |
0.0005 |
0.15 |
0.0005 |
0.15 |
0.0005 |
0.15 |
0.0005 |
0.15 |
0.0005 |
0.15 |
0.0005 |
0.15 |
Mn |
0.001 |
2 |
0.001 |
3.5 |
0.001 |
3.2 |
0.001 |
3.2 |
0.001 |
3.2 |
0.001 |
3.2 |
0.001 |
0.5 |
0.001 |
3.5 |
Mo |
0.002 |
2 |
- |
- |
0.002 |
10 |
0.002 |
8 |
0.002 |
12 |
0.002 |
36 |
0.002 |
5 |
0.002 |
40 |
Nb |
0.005 |
2 |
- |
- |
0.005 |
1 |
0.005 |
4 |
0.005 |
8 |
0.005 |
8 |
0.005 |
2 |
0.005 |
8.5 |
P |
0.005 |
0.08 |
- |
- |
- |
- |
- |
- |
- |
- |
- |
- |
- |
- |
0.005 |
0.08 |
Pb |
0.005 |
0.08 |
- |
- |
- |
- |
- |
- |
- |
- |
- |
- |
- |
- |
0.005 |
0.08 |
S |
0.001 |
0.07 |
0.003 |
0.15 |
0.003 |
0.15 |
0.003 |
0.15 |
0.003 |
0.15 |
0.003 |
0.15 |
0.003 |
0.15 |
0.003 |
0.15 |
Si |
0.005 |
0.5 |
0.005 |
7 |
0.005 |
2 |
0.005 |
3 |
0.005 |
2.5 |
0.005 |
2.5 |
0.005 |
1 |
0.005 |
8 |
Sn |
0.005 |
0.8 |
- |
- |
0.005 |
0.8 |
0.005 |
0.7 |
0.005 |
0.8 |
0.005 |
0.7 |
0.005 |
0.7 |
0.005 |
0.8 |
Ta |
- |
- |
- |
- |
- |
- |
- |
- |
- |
- |
- |
- |
0.01 |
8 |
0.01 |
8 |
Ti |
0.005 |
2 |
0.005 |
1.5 |
0.005 |
6 |
0.005 |
6 |
0.005 |
6 |
0.005 |
6 |
0.005 |
2.5 |
0.005 |
7 |
V |
0.005 |
1 |
0.005 |
1 |
0.005 |
1.2 |
0.005 |
1.2 |
0.005 |
1.2 |
0.005 |
1.2 |
0.005 |
1.2 |
0.005 |
1 |
W |
0.015 |
1 |
- |
- |
0.015 |
3 |
0.015 |
3 |
0.015 |
5 |
0.015 |
13.5 |
3 |
13.5 |
0.015 |
13.5 |
Zr |
0.005 |
0.35 |
- |
- |
0.005 |
0.35 |
0.005 |
0.35 |
0.001 |
0.35 |
0.005 |
0.35 |
0.005 |
0.35 |
0.005 |
0.35 |
Ni |
internal Standard |
internal Standard |
internal Standard |
internal Standard |
internal Standard |
internal Standard |
internal Standard |
internal Standard |
用户提供标样,日立分析仪器可现场延长测量上限。
注意事项:
仪器成套性与可选购件可参考产品原页面,本页只提供仪器核心技术参数。
产品价格均含有商品运费(大陆地区除外)及发票的价格但是不包含工程师上门培训及调试的费用。
科信不保证网站展示产品的时效性,部分仪器可能已升级,保留最终解释权。
科信报价:¥0.00